Flow rate measurement in gravity irrigation systems using sluice gates
DOI:
https://doi.org/10.31285/AGRO.27.1177Keywords:
irrigation, discharge coefficient, gates, discharge measurementAbstract
Gates are used to divert water to rice production plots in eastern Uruguay. In this study, the operating curves of rectangular gates installed at the entrance of circular section pipes are determined for submerged discharge conditions, which can be also used as gauging structures. For the tests, the gates were mounted at the inlet end of 6-m-long,sanitary-type PVC pipes, and with a nominal diameter of 250 and 315 mm. This configuration is analogous to that used in gravity irrigation systems. The derivation of the operating equations of the gates in this configuration is presented. The discharge coefficients (Cd) experimentally obtained show that discharge under the gate is dependent on the opening and on the upstream and downstreamdifference in depth, in addition to the Reynolds number under the gate. The dependence on the Reynolds number, which is usually omitted in other applications, is relevant in the case of rice irrigation, given the low velocities, and allows its use as a regulation structure and water gauging in these systems.
Downloads
References
Castro O, Lozano D, Mateos L. Energy and momentum velocity coefficients for calibrating submerged sluice gates in irrigation canals. J Irrig Drain Eng. 2010;136(9):610-6.
García Petillo M. Análisis crítico del reigo por gravedad en lascondiciones del Uruguay. Agrociencia. 2011;15(2):76-82. Doi: 10.31285/AGRO.15.595.
Habibzadeh A, Vatankhah A, Rajaratnam N. Role of energy loss on discharge characteristics of sluice gates. J Hydraul Eng. 2011;137(9):1079-84.
Hoseini P, Ali R, Vatankhah AR. Stage-discharge relationship for slide gates installed in partially full pipes. Flow Meas Instrum. 2021;77:101838. Doi: 10.1016/j.flowmeasinst.2020.101838
Howes D, Burt C. Accuracy of round meter gates for on-farm deliveries. J Irrig Drain Eng. 2015;142:04015032. Doi: 10.1061/(ASCE)IR.1943-4774.0000930.
Howes D, Burt C. Rating rectangular farm delivery meter gates for flow measurement. J Irrig Drain Eng. 2015;142:04015033. Doi: 10.1061/(ASCE)IR.1943-4774.0000931.
Lozano D, Mateos L, Merkley G, Clemmens A. Field calibration of submerged sluice gates in irrigation canals. J Irrig Drain Eng. 2009;135(6):763-72.
Sauida M. Calibration of submerged multi-sluice gates. Alex Eng J. 2014;53:663-8.
Sepúlveda C, Gomez M, Rodellar J. Benchmark of discharge calibration methods for submerged sluice gates. J Irrig Drain Eng. 2009;135:676-82.
Sotelo G. Hidráulica general. Vol. 1, Fundamentos. México: Limusa; 1998. 561p.
Vatankhah A, Ghaderinia H. Semi-circular flap gate as a flow metering structure in circular channels. Flow Meas Instrum. 2018;64:28-38.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Agrociencia Uruguay
This work is licensed under a Creative Commons Attribution 4.0 International License.
Article metrics | |
---|---|
Abstract views | |
Galley vies | |
PDF Views | |
HTML views | |
Other views |